Rx8330 ericsson инструкция на русском

Краткое содержание страницы № 1

Краткое содержание страницы № 2

RX8310/15/30 Distribution Receivers Copyright © Copyright Ericsson AB 2011. All rights reserved. Disclaimer No part of this document may be reproduced in any form without the written permission of the copyright owner. The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of any kind resulting from the use of this document. Customer Services Eur

Краткое содержание страницы № 3

Contents Contents 1 Introduction……………………………………………………………………………….. 5 1.1 Who Should Use this User Guide?…………………………………………………. 5 1.2 What Equipment is Covered by this User Guide? …………………………….. 5 1.3 Hardware and Software Options ……………………………………………………. 6 2 Installing the Equipment………………………………………………..

Краткое содержание страницы № 4

Contents List of Figures Figure 1 Rear Panel Connectors (RX8310/BAS with RX83XX/HWO/IP/OUT) ……9 Figure 2 Rear Panel Connectors (RX8315/BAS with RX83XX/HWO/IP/OUT) ……9 Figure 3 Rear Panel Connectors (RX8330/BAS with RX83XX/HWO/IP/OUT) ….10 Figure 4 Front Panel LEDs and Pushbuttons……………………………………………….16 Figure 5 Front Panel Menus………………………………………………………………………18 Figure 6 Web Page Overview (Typi

Краткое содержание страницы № 5

Introduction 1 Introduction 1.1 Who Should Use this User Guide? This User Guide is written for operators/users of the RX8310, RX8315 and RX8330 Distribution Receivers to assist in installation and operation. Detailed information can be found in the Reference Guide companion document which is issued on CD. Warning! Do not remove the covers of this equipment. Hazardous voltages are present within this equipment and may be exposed if the covers are removed. Only Ericsson trained and app

Краткое содержание страницы № 6

Introduction 1.3 Hardware and Software Options See Table 2, 3, 4 and 5 for a list of hardware and software options available with the receivers. Detailed information is in the Reference Guide. Table 2 RX8310/RX8315/RX8330 Hardware Options Marketing Code Price Object Supply Object Description Number Number RX83XX/HWO/IP/OUT FAZ 101 0108/22 ROA 128 3646 Dual Gigabit IP Transport Stream Output Card RX8XXX/CABLE/XLR FAZ 101 0108/24 RPM 901 364 XLR Terminal Audio Break-out Cable RX8XXX/

Краткое содержание страницы № 7

Introduction Table 4 RX8330 Hardware Options Marketing Code Price Object Supply Object Description Number Number RX83XX/HWO/RSECAM FAZ 101 0108/33 ROA 128 4418 Russian SECAM Output Card Table 5 RX8330 Software Options Marketing Code Price Object Supply Object Description Number Number RX83XX/SWO/BISS FAZ 101 0108/30 FAT 102 0132 BISS Modes 1 and E RX83XX/SWO/BISS/MSD FAZ 101 0108/16 FAT 102 0133 BISS Modes 1 and E Multi-Service Decryption RX83XX/SWO/DIR5/MSD FAZ 101 0108/3 FAT 102

Краткое содержание страницы № 8

Installing the Equipment 2 Installing the Equipment 2.1 Introduction For best performance and reliability follow the instructions for site requirements and installation in the Reference Guide and only use installation accessories recommended by the manufacturers. Warning! Do not remove the covers of this equipment. Hazardous voltages are present within this equipment and may be exposed if the covers are removed. Only Ericsson trained and approved service engineers are permitted to se

Краткое содержание страницы № 9

Installing the Equipment Warning! The Technical Earth is not a Protective earth for electric shock protection. This unit must be correctly earthed through the molded plug supplied. If the local mains supply does not have an earth conductor do not connect the unit. Contact Customer Services for advice. Before connecting the unit to the supply, check the supply requirements in Annex B of the Reference Guide. 2.4 Rear Panel Connectors Always use the specified cables supplied for signal i

Краткое содержание страницы № 10

Installing the Equipment RF IN 1-4 IP OUT 1-2 AUDIO OUT (1) AC POWER 1-2 CA ASI/SDI OUT 1-2 CVBS ASI INPUT ETHERNET 1-2 ALARM TECHNICAL INTERFACE EARTH Figure 3 Rear Panel Connectors (RX8330/BAS with RX83XX/HWO/IP/OUT) Table 6 Types of Connector Type of Connector Description RF IN 1,2,3 & 4 F-type connectors for DVB or DVB-S2 modulated input feed. IP OUT 1 & 2 8-way RJ-45 connectors for 1000BaseT IP output feed. AUDIO OUT 1 & 2 9-way male D-type connectors for analogue

Краткое содержание страницы № 11

Installing the Equipment 2.5 Connecting the Receiver to the Power Supply Warning! Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. As no mains switch is fitted to this unit, ensure the local power supply is switched OFF before connecting the supply cord. The receiver is not fitted with an on/off switch. Ensure that the socket-outlet is installed near the equipment so that it is easily accessible. Failure to isolate the equipment

Краткое содержание страницы № 12

Quick Start Guide: Connect-Power-Configure 3 Quick Start Guide: Connect-Power-Configure 3.1 Connecting the Receiver The following points should be noted when making signal connections to the receiver: • If you have an incoming satellite RF feed, this should be connected to the rear panel connector marked RF IN 1 — 4. • If you have an incoming ASI feed, this should be connected to the ASI Input. • Decoded PAL or NTSC video is output on connectors CVBS 1 and CVBS 2. These outputs are i

Краткое содержание страницы № 13

Quick Start Guide: Connect-Power-Configure 2. Switch on the AC power supply to the unit at the wall or rack outlet. Note: The RX8310/15/30 Receivers do NOT contain a power on/off switch. 3. After a short period of initialization the following screen is displayed on the Front Panel: INITIALIZING 4.3.2 (Bank 0) 4. During initialization, confirm that the Status LED is on and all Up, Down, Left, Right, Edit and Save pushbuttons are lit. 3.2.2 Power Up Operating Modes When the equipment

Краткое содержание страницы № 14

Quick Start Guide: Connect-Power-Configure 8. Set the set the LNB power output level A description of each of these User Settings can be found in the Reference Guide. Note: If the unit has successfully locked to the incoming feed, then the TS Lock value in menu Input should be LOCKED. 3.4 Selecting a Decode Service (Program) To select a decode service: 1. Navigate to the Service menu. For incoming feeds containing only a single service the service may be selected automatically dependi

Краткое содержание страницы № 15

Quick Start Guide: Connect-Power-Configure • Alternative audio components may be selected from the service tab on the Web Control interface 3.7 Configuring for Single-service Decryption When configuring for Single-service Decryption the following points should be observed: • If the service selected for video decode contains encrypted components these components will automatically be decrypted by the unit. • The outgoing feed from the unit will contain these decrypted components provid

Краткое содержание страницы № 16

Front Panel Control 4 Front Panel Control 4.1 Introduction The front panel display and keypad can be used to configure, control and monitor the receiver when an external control system is not used. Note: A list of receiver User Settings that may be viewed or changed via the front panel and those that may be viewed or changed via the external web browser interface can be found in the Reference Guide. 4.2 Receiver Front Panel LCD EDIT LEFT UP USB Connector Status LED SAVE DOWN RIGH

Краткое содержание страницы № 17

Front Panel Control 4.3.2 LCD A 2-line x 40-character back-lit dot-matrix Liquid Crystal Display (LCD) displays various menus and settings. The menus and setting available will vary depending on which options have been enabled through the purchase of a suitable license. 4.3.3 Arrow Pushbuttons Four arrow pushbuttons (or keys) are used to navigate through the front panel LCD menus. Each arrow pushbutton is backlit by an integral LED when active, indicating that a further choice or act

Краткое содержание страницы № 18

Front Panel Control 4.4 Front Panel Menus An overview of the available Front Panel menus is shown below. The menus and settings available will vary depending on which receiver model is being used and which options have been enabled through the purchase of a suitable license. Note: The menu structure is subject to change as further functionality is added. SWITCH ON 1.1 Network Menu Boot Screen INITIALIZING — 1.1.1 IP1 4.3.2 (Bank 0) — 1.1.2 MAC1 — 1.1.3 IP2 — 1.1.4 MAC2

Краткое содержание страницы № 19

Front Panel Control 4.4.1 Menu Structure The Front Panel menus and sub-menus, available on the LCD, provide the configuration parameters that may be viewed, selected and/or modified. • System — Provides sub-menus for viewing/configuring the receiver hardware and access parameters. — Network – Enables the input and display of the addresses required to communicate with the receiver. Access to the receiver Status page is also available from this sub-menu. — Build — Provides version and I

Краткое содержание страницы № 20

Front Panel Control — TS Feed Selection — Enables selection of the descrambling for the Transport Stream Feed. • Presets — Provides sub-menus for viewing, storing and retrieving up to 40 sets of input configuration parameters (tuning parameters and service selections). — Preset State — Enables the current list of presets to be viewed. — Select/Save Preset — Enables selection and saving of presets. More detail on all user settings may be found in the Reference Guide. EN/LZT 790 00

Distribution Receiver

The Ericsson RX8330 Distribution Receiver extends the RX8300 series of Integrated Receiver Decoders by

providing feature-rich multi-format standard definition (SD) decoding capability with high quality SDI output

for video distribution applications. The RX8330 gives the user access to the latest compression and

transmission technologies to allow for the most cost-effective and bandwidth transmissions possible while

ensuring the highest standards of reliability and video quality.

The RX8330 offers both ASI and the latest DVB-S2 capable satellite input interfaces. As security of content

is always of paramount importance, compatibility with popular CA systems including DVB Common

Interface is provided. The RX8330 shows its true class through its capability for multi-format decoding of all

SD 4:2:0 video standards combined with high quality SDI digital video and analog video outputs. This

capability is further enhanced by the RX8330’s ability to receive, and down-convert HD video to SD

providing an SD output for broadcast or monitoring. Additionally for systems that stay in the compressed

domain, decrypted transport streams can be handed off into digital networks through a choice of both ASI or

optional IP output interfaces.

The feature-rich specification of the RX8330 provides the capability and flexibility that places the receiver as

the key link in the broadcast chain for applications from content distribution and turn-around to critical

network monitoring.

PRODUCT OVERVIEW

The Perfect Choice for a Large Network

The RX8330 is the perfect receive device for distribution of video services

throughout a large network. The RX8330 provides the most up-to-date

feature-set, combining maximum transmission efficiency with easy remote

management of the receiver population.

Increased Distribution Capacity and Efficiency

The RX8330 in combination with Ericsson’s MPEG-4 AVC encoders and

PREKOR™ Dynamic Pre-correction System leads to a highly efficient

video distribution system. Combined with the additional 30 percent

increase in channel capacity of DVB-S2 the RX8330 allows operators to

achieve three times the amount of content through a transponder.

Multi-format Decoding — a «Safe Choice» for the Future

The RX8330 decodes all major SD video formats in use today providing

complete flexibility for daily operations. The versatility that the RX8330

decoder provides makes it a «safe choice» for companies that are

beginning to transmit MPEG-4 AVC SD but also continue to work in

MPEG-2 SD. With the RX8330 they can migrate at their own pace.

Simplified Control and Lower Cost of Operations

Organizations with large populations of RX8330 receivers and other

Ericsson receivers can simplify control by integrating with Director by

Ericsson. Director provides remote, over-air, single-view control from a

central location, reducing the need for on-site local operators.

Ericsson RX8330

BASE UNIT FEATURES

RX8330 – Distribution Receiver (RX8330/BAS, FAZ 101 0108/1)

The following features are available as standard:

•

Four input DVB-S QPSK satellite demodulator

•

Transport stream input with ASI connection

•

Dual switchable ASI/SDI output (SDI via additional license)

•

Single service DVB Common Interface CA support

•

Single service BISS CA support

•

Director single service decryption, Ooer-air control and software

download

•

Front panel and Web browser control, with alarm relay

•

SCTE 35 controlled contact closures for ad-insertion signaling

Optional features include:

•

DVB-S2 QPSK, 8PSK and 16APSK* demodulation

•

DVB-S2 VCM mode support*

•

Transport stream over IP output

•

Multi-service decryption via Pro CAMs

•

Multi-service BISS decryption

•

MPEG-2 SD 4:2:0 video decoding

•

MPEG-2 HD 4:2:0 down-conversion

•

MPEG-4 AVC SD video decoding

•

MPEG-4 AVC HD down-conversion

•

®

Two stereo pair Dolby

Digital audio decoding with 5.1 to 2.0 down-

mixing

•

AAC audio decoding with 5.1 to 2.0 down-mixing

•

SDI digital video output

•

MPE IP data de-encapsulation

•

Single service filtering and PID remapping

08-2012-v6

Руководстве по эксплуатации Ericsson RX8330 — вам приходилось его терять? Поскольку вы попали сюда, наверняка с вами это случилось. Но вы не единственный человек, сталкивающийся с проблемами с хранением руководства по эксплуатации всех домашних устройств. Ниже несколько советов, касающихся того, зачем собирать руководства по эксплуатации.

Руководстве по эксплуатации Ericsson RX8330 это определенный вид технической документации, являющейся неразлучным элементом каждого устройства, которое мы приобретаем. Они отличаются между собой количеством информации, которую можно найти на тему данного устройства: напр. Ericsson RX8330. Конечно же, если производитель считает что необходимо передать нам большее количество информации, касающейся устройства Ericsson RX8330, то стоит ее хоть раз прочитать — в начале, сразу же после покупки данной вещи. Однако мы считаем, что инструкции должны заключать самую важную, наиболее необходимую информацию о Ericsson RX8330, так, чтобы не отнимать желания пользователя прочесть ее уже в самом начале. Несомненно, если устройство Ericsson RX8330 имеет много продвинутых функций, неизбежно большое количество информации в содержании этого документа.

Które из информации в инструкции Ericsson RX8330 необходимо обязательно прочитать?

• Информацию, касающуюся правильного использования и ухода за устройством Ericsson RX8330 — нам необходимо ознакомиться с основными правилами, чтобы в случае проблем с устройством сервисный центр не отказал нам в гарантийном обслуживании, из-за неправильного использования
• Информация, касающаяся самых частых проблем с Ericsson RX8330 и способы их решения
• Информация, касающаяся гарантии устройства Ericsson RX8330 и ближайших сервисных центров, способных починить устройство в соответствии с рекомендациям производителя Ericsson

Как хранить инструкции дома?

Хорошей идеей является предназначение одного ящика, в котором бы хранилась инструкция Ericsson RX8330 а также всех других домашних устройств которыми мы пользуемся. Тогда значительно легче вам будет ее найти, чем искать в родных коробках, которые наверняка уже выбросили вы, или другие домочадцы. Раз в год достаточно просмотреть ящик и выбросить инструкции, которые касаются устройств, которыми вы уже не пользуетесь. Таким образом вы избежите хранения ненужных документов, а останутся только актуальные. Вы можете также скачать и распечатать инструкцию Ericsson RX8330 чтобы разместить ее в своем ящике.

Похожие инструкции

IP Transport Stream Output

(RX83XX/HWO/IP/OUT, FAZ 101 0108/22)

•

Encapsulation of transport stream output into IP multicast

•

MPTS or single SPTS output stream

•

2x Gigabit Ethernet RJ-45 interfaces

Russian SECAM Output

(RX83XX/HWO/RSECAM, FAZ 101 0108/33)

•

High quality Russian SECAM output

•

Mutually exclusive with IP TS output option

SOFTWARE OPTIONS

Input Options

The RX8330 comes with DVB-S, QPSK support as standard. The unit can

also be licensed to support the DVB-S2 satellite transmission standard.

DVB-S2 QPSK License

(RX83XX/SWO/DVBS2/QPSK, FAZ 101 0108/6)

•

Adds DVB-S2 QPSK capability to DVB-S2 input option card

DVB-S2 8PSK License

(RX83XX/SWO/DVBS2/8PSK, FAZ 101 0108/4)

•

Adds DVB-S2 QPSK, 8PSK capability to DVB-S2 input option card

DVB-S2 16APSK License (RX83XX/SWO/DVBS2/16APSK)*

•

Adds DVB-S2 QPSK, 8PSK and 16APSK capability to DVB-S2 input

option card

DVB-S2 Low Symbol Rate License

(RX83XX/SWO/DVBS2/LSYM, FAZ 101 0108/5)

•

Enables DVB-S2 symbol rate of 1 Msym/s to 5 Msym/s

DVB-S2 Multi-Transport Stream License

(RX83XX/SWO/DVBS2/VCM)*

•

Provides DVB-S2 Variable Coding and Modulation support

•

Single TS output

Null Packet Detection Redundancy Switching

(RX83XX/SWO/NULL, FAZ 101 0108/17)

•

Redundancy switching from primary to secondary input triggered by

presence of a user defined % of null packets in the incoming stream

Decoding Options

The RX8330 is designed to support a range of video decoding standards

MPEG-2 SD Decoding

(RX83XX/SWO/MPEG2/SD, FAZ 101 0108/10)

•

Enables MPEG-2 SD 4:2:0 decoding

MPEG-2 HD Down-conversion

(RX83XX/SWO/MPEG2/HD, FAZ 101 0108/9)

•

Enables MPEG-2 SD and HD 4:2:0 decoding

•

HD video is down-converted and presented as SD on CVBS output

MPEG-4 AVC SD Decoding

(RX83XX/SWO/MP2/MP4/SD, FAZ 101 0108/12)

•

Enables MPEG-2 and MPEG-4 AVC SD 4:2:0 video decoding

MPEG-4 AVC HD Down-conversion

(RX83XX/SWO/MP2/MP4/SD/HD, FAZ 101 0108/11)

•

Enables MPEG-2 SD and HD, MPEG-4 AVC SD and HD 4:2:0 decoding

•

HD video is down-converted and presented as SD on CVBS output

Video Output Options

The RX8330 is always supplied with analog composite video output. The

RX8330can additionally be enabled with this option.

SDI Digital Video Output (RX83XX/SWO/SDI, FAZ 101 0108/35)

•

Enables SDI digital video output on RX8330 unit

Ericsson RX8330 Distribution Receiver

Screw Terminal Audio Break-Out Cable

(RX8XXX/CABLE/SCRTRM, FAZ 101 0108/23)

•

Provides screw terminal connections for analog audio output

•

1x stereo pair per breakout cable

XLR Terminal Audio Break-Out Cable

(RX8XXX/CABLE/XLR, FAZ 101 0108/24)

•

Provides XLR terminal connections for analog audio output

•

1x stereo pair per breakout cable via 2x XLR connectors

Security Options

Password Protection of Web Browser

(RX83XX/SWO/PW, FAZ 101 0108/29)

•

Enables password protection feature of web browser control

Audio Options

®

Dolby

Digital Decode (RX83XX/SWO/AC3, FAZ 101 0108/28)

•

Enables decoding of Dolby Digital Audio

•

2x 2.0 (stereo) decoding

•

2x 5.1 down-mix to 2.0 (stereo)

AAC Decode (RX83XX/SWO/AAC, FAZ 101 0108/2)

•

Enables decoding of AAC-LC and HE-AAC

•

2x 2.0 (stereo) decoding

•

2x 5.1 down-mix to 2.0 (stereo)

Conditional Access Options

Multi-Service CAM Decryption

(RX83XX/SWO/MSD, FAZ 101 0108/13)

•

Decrypt multiple services via professional CAMs

•

Simultaneously decrypt up to 10 services or 24 PIDs max

Director by Ericsson Multi-service Decryption

(RX83XX/SWO/DIR5/MSD, FAZ 101 0108/3)

•

Director multi-service decryption,

•

Director over-air control and software download

BISS Multi-service CA

(RX83XX/SWO/BISS/MSD, FAZ 101 0108/16)

•

Multi-service decryption for BISS

•

Support for multiple BISS keys

Stream Processing Options

Single Service Filtering

(RX83XX/SWO/SING/SERVFILT, FAZ 101 0108/15)

•

Filter multiple services to output a single service

•

Re-map PIDs for the outgoing service

Multi-Service Filtering

(RX83XX/SWO/MULT/SERVFILT, FAZ 101 0108/14)

•

Filter N multiple incoming services to M outgoing services

•

Re-map PIDs for a single service

•

CBR MPTS transport stream output

•

Service splitting for multiple IP SPTS output

SMPTE 2022M Pro-MPEG FEC License on IP TS Output

(RX83XX/SWO/IP/OUT/PROMPEG, FAZ 101 0108/8)

•

Enables SMPTE 2022M Pro-MPEG FEC capability for the IP output

card

•

Requires IP output card

Data Options

High Speed Data Output (RX83XX/SWO/IP/DATA, FAZ 101 0108/7)

•

MPE based data de-encapsulation of IP data

•

Requires IP TS output option

08-2012-v6