-
Bookmarks
-
ENGLISH, page 1
-
РУССКИЙ, страница 89
-
FRANÇAIS, page 50
-
ESPAÑOL, página 76
-
DEUTSCH, seite 37
-
ITALIANO, pagina 63
-
PORTUGUÊS, página 102
-
POLSKI, strona 115
-
汉语, 第 154 页
-
日本語, 141ページ
-
조선말/한국어, 128페이지
-
漢語, 第 168 页
Quick Links
Version 1.1
Published May 2020
Copyright©2020 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
«Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate»
ASRock Website: http://www.asrock.com
Summary of Contents for ASROCK Z490 Phantom Gaming 4/2.5G
инструкцияAsrock Z490 Phantom Gaming 4/2.5G
Посмотреть инструкция для Asrock Z490 Phantom Gaming 4/2.5G бесплатно. Руководство относится к категории материнские платы, 1 человек(а) дали ему среднюю оценку 9.6. Руководство доступно на следующих языках: английский. У вас есть вопрос о Asrock Z490 Phantom Gaming 4/2.5G или вам нужна помощь? Задайте свой вопрос здесь
- Chapter 1 Introduction
Нужна помощь?
У вас есть вопрос о Asrock а ответа нет в руководстве? Задайте свой вопрос здесь Дай исчерпывающее описание проблемы и четко задайте свой вопрос. Чем детальнее описание проблемы или вопроса, тем легче будет другим пользователям Asrock предоставить вам исчерпывающий ответ.
Количество вопросов: 0
Главная
| Asrock | |
| Z490 Phantom Gaming 4/2.5G | Z490 PHANTOM GAMING 4/2.5G | |
| материнская плата | |
| английский | |
| Руководство пользователя (PDF) |
Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Asrock Z490 Phantom Gaming 4/2.5G.
Инструкция Asrock Z490 Phantom Gaming 4/2.5G доступно в русский?
Не нашли свой вопрос? Задайте свой вопрос здесь
Version 1.1
Published May 2020
Copyright©2020 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)
The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
CE Warning
This device complies with directive 2014/53/EU issued by the Commision of the European Community.
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Operations in the 5.15-5.35GHz band are restricted to indoor usage only.
|
Radio transmit power per transceiver type |
|||||
|
Function |
Frequency |
Maximum Output Power (EIRP) |
|||
|
2400-2483.5 MHz |
18.5 + / -1.5 dbm |
||||
|
5150-5250 MHz |
21.5 + / -1.5 dbm |
||||
|
WiFi |
5250-5350 MHz |
18.5 + / -1.5 dbm (no TPC) |
|||
|
21.5 + / -1.5 dbm (TPC) |
|||||
|
5470-5725 MHz |
25.5 + / -1.5 dbm (no TPC) |
||||
|
28.5 + / -1.5 dbm (TPC) |
|||||
|
Bluetooth |
2400-2483.5 MHz |
8.5 + / -1.5 dbm |
Contents
|
Chapter 1 Introduction |
1 |
|
|
1.1 |
Package Contents |
1 |
|
1.2 |
Specifications |
2 |
|
1.3 |
Motherboard Layout |
7 |
|
1.4 |
I/O Panel |
9 |
|
1.5 |
WiFi-802.11ax Module and ASRock WiFi 2.4/5 GHz Antenna |
10 |
|
Chapter 2 Installation |
12 |
|
|
2.1 |
Installing the CPU |
13 |
|
2.2 |
Installing the CPU Fan and Heatsink |
16 |
|
2.3 |
Installing Memory Modules (DIMM) |
17 |
|
2.4 |
Expansion Slots (PCI Express Slots) |
19 |
|
2.5 |
Jumpers Setup |
20 |
|
2.6 |
Onboard Headers and Connectors |
21 |
|
2.7 |
Post Status Checker |
27 |
|
2.8 |
CrossFireXTM and Quad CrossFireXTM Operation Guide |
28 |
|
2.8.1 |
Installing Two CrossFireXTM-Ready Graphics Cards |
28 |
|
2.8.2 |
Driver Installation and Setup |
30 |
|
2.9 |
M.2 WiFi/BT Module Installation Guide |
31 |
|
2.10 |
M.2_SSD (NGFF) Module Installation Guide (M2_2) |
33 |
|
Chapter 3 Software and Utilities Operation |
37 |
|
3.1 |
Installing Drivers |
37 |
|
3.2 |
ASRock Motherboard Utility (Phantom Gaming Tuning) |
38 |
|
3.3 |
ASRock Live Update & APP Shop |
41 |
|
3.3.1 |
UI Overview |
41 |
|
3.3.2 |
Apps |
42 |
|
3.3.3 |
BIOS & Drivers |
45 |
|
3.3.4 |
Setting |
46 |
|
3.4 |
Nahimic Audio |
47 |
|
3.5 |
ASRock Polychrome SYNC |
48 |
|
Chapter 4 UEFI SETUP UTILITY |
51 |
|
|
4.1 |
Introduction |
51 |
|
4.2 |
EZ Mode |
52 |
|
4.3 |
Advanced Mode |
53 |
|
4.3.1 |
UEFI Menu Bar |
53 |
|
4.3.2 |
Navigation Keys |
54 |
|
4.4 |
Main Screen |
55 |
|
4.5 |
OC Tweaker Screen |
56 |
|
4.6 |
Advanced Screen |
69 |
|
4.6.1 |
CPU Configuration |
70 |
|
4.6.2 |
Chipset Configuration |
72 |
|
4.6.3 |
Storage Configuration |
75 |
|
4.6.4 |
Intel(R) Thunderbolt |
76 |
|
4.6.5 |
Super IO Configuration |
78 |
|
4.6.6 |
ACPI Configuration |
79 |
|
4.6.7 |
USB Configuration |
80 |
|
4.6.8 |
Trusted Computing |
81 |
|
4.7 |
Tools |
82 |
|
4.8 |
Hardware Health Event Monitoring Screen |
84 |
|
4.9 |
Security Screen |
88 |
|
4.10 |
Boot Screen |
89 |
|
4.11 |
Exit Screen |
92 |
Z490 Phantom Gaming 4/ax
Chapter 1 Introduction
Thank you for purchasing ASRock Z490 Phantom Gaming 4/ax motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
In this documentation, Chapter 1 and 2 contains the introduction of the motherboard and step-by-step installation guides. Chapter 3 contains the operation guide of the software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice. In case any modifications of this documentation occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
1.1 Package Contents
•ASRock Z490 Phantom Gaming 4/ax Motherboard (ATX Form Factor)
•ASRock Z490 Phantom Gaming 4/ax Quick Installation Guide
•ASRock Z490 Phantom Gaming 4/ax Support CD
•2 x Serial ATA (SATA) Data Cables (Optional)
•1 x ASRock WiFi 2.4/5 GHz Antenna (Optional)
•1 x Screw for M.2 Socket (Optional)
•1 x I/O Panel Shield
English
1
English
1.2 Specifications
|
Platform |
• |
ATX Form Factor |
|
• |
Solid Capacitor design |
|
|
CPU |
• |
Supports 10th Gen Intel® CoreTM Processors (Socket 1200) |
|
• |
Digi Power design |
|
|
• 10 Power Phase design |
||
|
• Supports Intel® Turbo Boost Max 3.0 Technology |
||
|
• Supports Intel® K-Series unlocked CPUs |
||
|
• Supports ASRock BCLK Full-range Overclocking |
||
|
Chipset |
• |
Intel® Z490 |
|
Memory |
• |
Dual Channel DDR4 Memory Technology |
•4 x DDR4 DIMM Slots
•Supports DDR4 4400+(OC)*/4333(OC)/4266(OC)/4133(OC)/ 4000(OC)/3866(OC)/3800(OC)/3733(OC)/3600(OC)/ 3200(OC)/2933/2800/2666/2400/2133 non-ECC, un-buffered memory
*Please refer to Memory Support List on ASRock’s website for more information. (http://www.asrock.com/)
*CoreTM (i9/i7) support DDR4 up to 2933; CoreTM (i5/i3), Pentium® and Celeron® support DDR4 up to 2666.
•Supports ECC UDIMM memory modules (operate in nonECC mode)
•Max. capacity of system memory: 128GB
•Supports Intel® Extreme Memory Profile (XMP) 2.0
•15μ Gold Contact in DIMM Slots
|
Expansion |
• 2 x PCI Express 3.0 x16 Slots (PCIE2/PCIE4: single at x16 |
|
Slot |
(PCIE2); dual at x16 (PCIE2) / x4 (PCIE4)* |
|
* Supports NVMe SSD as boot disks |
|
|
• 3 x PCI Express 3.0 x1 Slots |
|
|
• Supports AMD Quad CrossFireXTMand CrossFireXTM |
|
|
• 1 x M.2 Socket (Key E) with the bundled WiFi-802.11ax |
|
|
module |
2
Z490 Phantom Gaming 4/ax
|
Graphics |
* Intel® UHD Graphics Built-in Visuals and the VGA outputs can |
|
|
be supported only with processors which are GPU integrated. |
||
|
• Hardware Accelerated Codecs: AVC/H.264, HEVC/H.265 |
||
|
8bit, HEVC/H.265 10bit, VP8, VP9 8bit, VP9 10bit, MPEG 2, |
||
|
MJPEG, VC-1 |
||
|
* VP9 10bit and VC-1 are for decode only. |
||
|
* VP8 and VP9 encode are not supported by Windows OS. |
||
|
• Graphics, Media & Compute: Microsoft DirectX 12, OpenGL |
||
|
4.5, Intel® Built In Visuals, Intel® Quick Sync Video, Hybrid / |
||
|
Switchable Graphics, OpenCL 2.1 |
||
|
• Display & Content Security: Rec. 2020 (Wide Color Gamut), |
||
|
Microsoft PlayReady 3.0, Intel® SGX Content Protection, |
||
|
UHD/HDR Blu-ray Disc |
||
|
• Supports HDMI 1.4 with max. resolution up to 4K x 2K |
||
|
(4096×2160) @ 30Hz |
||
|
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and |
||
|
HBR (High Bit Rate Audio) with HDMI 1.4 Port |
||
|
(Compliant HDMI monitor is required) |
||
|
• Supports HDCP 2.3 with HDMI 1.4 Port |
||
|
• Supports 4K Ultra HD (UHD) playback with HDMI 1.4 Port |
||
|
Audio |
• |
7.1 CH HD Audio with Content Protection (Realtek ALC1200 |
|
Audio Codec) |
||
|
• Premium Blu-ray Audio support |
||
|
• |
Supports Surge Protection |
|
|
• |
PCB Isolate Shielding |
|
|
• Individual PCB Layers for R/L Audio Channel |
||
|
• |
Nahimic Audio |
|
|
LAN |
• |
Gigabit LAN 10/100/1000 Mb/s |
|
• Giga PHY Intel® I219V |
||
|
• Supports Wake-On-LAN |
||
|
• |
Supports Lightning/ESD Protection |
|
|
• Supports Energy Efficient Ethernet 802.3az |
||
|
• |
Supports PXE |
English
3
|
Wireless |
• Intel® 802.11ax WiFi Module |
|
LAN |
• Supports IEEE 802.11a/b/g/n/ax |
|
• Supports Dual-Band (2.4/5 GHz) |
|
|
• Supports WiFi6 802.11ax (2.4Gbps) |
|
|
• 2 antennas to support 2 (Transmit) x 2 (Receive) diversity |
|
|
technology |
|
|
• Supports Bluetooth 5.1 + High speed class II |
|
|
• Supports MU-MIMO |
|
|
Rear Panel |
• 2 x Antenna Ports |
|
I/O |
• 1 x PS/2 Mouse/Keyboard Port |
|
• 1 x HDMI Port |
|
|
• 1 x USB 3.2 Gen2 Type-A Port (10 Gb/s) (ReDriver) (Supports |
|
|
ESD Protection) |
|
|
• 1 x USB 3.2 Gen2 Type-C Port (10 Gb/s) (ReDriver) (Supports |
|
|
ESD Protection) |
|
|
• 2 x USB 3.2 Gen1 Ports (Supports ESD Protection) |
|
|
• 2 x USB 2.0 Ports (Supports ESD Protection) |
|
|
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED |
|
|
LED) |
|
|
• HD Audio Jacks: Line in / Front Speaker / Microphone |
|
|
Storage |
• 6 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0, |
|
RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology |
|
|
17), NCQ, AHCI and Hot Plug* |
|
|
* If M2_2 is occupied by a SATA-type M.2 device, SATA3_1 will |
|
|
be disabled. |
|
|
* If M2_2 is occupied by a PCIe-type M.2 device, SATA3_0 will |
|
|
be disabled. |
|
|
• 1 x Ultra M.2 Socket (M2_2), supports M Key type |
|
|
2260/2280/22110 M.2 SATA3 6.0 Gb/s module and M.2 PCI |
|
|
Express module up to Gen3 x4 (32 Gb/s)** |
|
|
** Supports Intel® OptaneTM Technology |
|
|
** Supports NVMe SSD as boot disks |
|
|
** Supports ASRock U.2 Kit |
English
4
Z490 Phantom Gaming 4/ax
|
Connector |
• 1 x COM Port Header |
•1 x SPI TPM Header
•1 x Power LED and Speaker Header
•2 x RGB LED Headers
*Support in total up to 12V/3A, 36W LED Strip
•2 x Addressable LED Headers
*Support in total up to 5V/3A, 15W LED Strip
•1 x CPU Fan Connector (4-pin)
*The CPU Fan Connector supports the CPU fan of maximum 1A (12W) fan power.
•1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan Speed Control)
*The CPU/Water Pump Fan supports the water cooler fan of maximum 2A (24W) fan power.
•4 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan Speed Control)
*The Chassis/Water Pump Fan supports the water cooler fan of maximum 2A (24W) fan power.
*CPU_FAN2/WP, CHA_FAN1/WP, CHA_FAN2/WP, CHA_ FAN3/WP and CHA_FAN4/WP can auto detect if 3-pin or 4-pin fan is in use.
•1 x 24 pin ATX Power Connector
•1 x 8 pin 12V Power Connector
•1 x 4 pin 12V Power Connector
•1 x Front Panel Audio Connector
•1 x Thunderbolt AIC Connector (5-pin) (Supports ASRock Thunderbolt 3 AIC R2.0 Card only)
•1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports ESD Protection)
•2 x USB 3.2 Gen1 Headers (Support 4 USB 3.2 Gen1 ports) (Supports ESD Protection)
|
BIOS |
• |
AMI UEFI Legal BIOS with multilingual GUI support |
|
Feature |
• |
ACPI 6.0 Compliant wake up events |
|
• |
SMBIOS 2.7 Support |
• CPU Core/Cache, GT, DRAM, PCH, VCCIO, VCCST, VCCSA Voltage Multi-adjustment
English
5
|
Hardware |
• Temperature Sensing: CPU, CPU/Water Pump, Chassis/Wa- |
|
Monitor |
ter Pump Fans |
|
• Fan Tachometer: CPU, CPU/Water Pump, Chassis/Water |
|
|
Pump Fans |
|
|
• Quiet Fan (Auto adjust chassis fan speed by CPU tempera- |
|
|
ture): CPU, CPU/Water Pump, Chassis/Water Pump Fans |
|
|
• Fan Multi-Speed Control: CPU, CPU/Water Pump, Chassis/ |
|
|
Water Pump Fans |
|
|
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM, |
|
|
VPPM, PCH, VCCSA, VCCST, VCCIO |
|
|
OS |
• Microsoft® Windows® 10 64-bit |
|
Certifica- |
• FCC, CE |
|
tions |
• ErP/EuP ready (ErP/EuP ready power supply is required) |
* For detailed product information, please visit our website: http://www.asrock.com
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
English
6
Z490 Phantom Gaming 4/ax
1.3 Motherboard Layout
|
/Mous Keyboard PS2 e |
USB: USBT: US2 2 1 .B 0 |
|||
HDMI1
USB 3.2 Gen2
T:USB31_TA_1
B: USB31_TC_1
|
USB 3.2 Gen1 |
Top: |
||||
|
T: USB3_1 |
RJ-45 |
||||
|
B: USB3_2 |
|||||
|
INMI Bottom C : |
FRON Center: T |
LINE Top: |
|||
32
SUPER
I/O
AUDIO
CODEC
CHA_FAN2/WP
PCIE1
Z490 PHANTOM GAMING 4/ax
PCIE2
|
M2_WIFI_CT1 |
WiFi-802.11ax |
WIFI1 |
CMOS |
|
Module |
_ |
||
|
M2 |
Battery |
||
PCIE3
Ultra M.2
PCIe Gen3 x4
|
DDR4 A1(64bit,288-pinmodule) |
DDR4 A2(64bit,288-pinmodule) |
DDR4 B1(64bit,288-pinmodule) |
||
Intel
Z490
DDR4_B2 (64 bit, 288-pin module)
ADDR_LED2
1 1
RGB_LED2
BOOT 
CPU 
DRAM 
VGA 
|
ATXPWR1 |
||
|
USB3 3 4 |
||
|
CHA FAN1/WP |
1 |
|
|
SATA3 0 |
SATA3 1 |
|
|
SATA3 2 |
SATA3 3 |
|
PCIE4 |
|||||||||
|
T B1 |
|||||||||
|
1 |
FAN4/WP |
||||||||
|
31 |
RoHS |
||||||||
|
2 |
CHA |
||||||||
|
CT4 |
CT5 |
CT6 |
M2_ |
||||||
|
PCIE5 |
|||||||||
|
30 |
SPI_TPM_J1 |
||||||||
|
SPK_PLED1 |
|||||||||
|
29 |
1 |
||||||||
|
RGB_LED1 |
1 |
1 |
|||||||
|
CLRMOS1 |
|||||||||
|
HD_AUDIO1 |
COM1 |
1 |
USB_3_4 |
USB3_5_6 |
CHA_FAN3/WP |
PANEL1 |
SATA3_4 |
SATA3_5 |
|
|
PLED PWRBTN |
|||||||||
|
ADDR_LED1 |
|||||||||
|
1 |
1 |
1 |
1 |
1 |
1 |
||||
|
HDLED RESET |
|||||||||
|
28 |
27 |
26 |
25 |
24 |
23 |
22 |
21 |
20 |
7
8
9
10
11
12
13
14
15
16
17
18
19
English
7
No. Description
1ATX 12V Power Connector (ATX12V1)
2ATX 12V Power Connector (ATX12V2)
32 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
42 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
5CPU Fan Connector (CPU_FAN1)
6CPU/Water Pump Fan Connector (CPU_FAN2/WP)
7RGB LED Header (RGB_LED2)
8Addressable LED Header (ADDR_LED2)
9Post Status Checker (PSC)
|
10 |
ATX Power Connector (ATXPWR1) |
||
|
11 |
USB 3.2 Gen1 Header (USB3_3_4) |
||
|
12 |
Chassis/Water Pump Fan Connector (CHA_FAN1/WP) |
||
|
13 |
SATA3 Connector (SATA3_1) |
||
|
14 |
SATA3 Connector (SATA3_0) |
||
|
15 |
SATA3 Connector (SATA3_3) |
||
|
16 |
SATA3 Connector (SATA3_2) |
||
|
17 |
Chassis/Water Pump Fan Connector (CHA_FAN4/WP) |
||
|
18 |
SPI TPM Header (SPI_TPM_J1) |
||
|
19 |
Power LED and Speaker Header (SPK_PLED1) |
||
|
20 |
SATA3 Connector (SATA3_5) |
||
|
21 |
SATA3 Connector (SATA3_4) |
||
|
22 |
System Panel Header (PANEL1) |
||
|
23 |
Chassis/Water Pump Fan Connector (CHA_FAN3/WP) |
||
|
24 |
USB 3.2 Gen1 Header (USB3_5_6) |
||
|
25 |
USB 2.0 Header (USB_3_4) |
||
|
26 |
Addressable LED Header (ADDR_LED1) |
||
|
27 |
COM Port Header (COM1) |
||
|
28 |
Front Panel Audio Header (HD_AUDIO1) |
||
|
29 |
RGB LED Header (RGB_LED1) |
||
|
30 |
Clear CMOS Jumper (CLRMOS1) |
||
|
English |
|||
|
31 |
Thunderbolt AIC Connector (TB1) |
||
|
32 |
Chassis/Water Pump Fan Connector (CHA_FAN2/WP) |
||
8
Z490 Phantom Gaming 4/ax
1.4 I/O Panel
|
4 |
|||||||||||||||
|
1 |
2 |
3 |
5 |
||||||||||||
|
9 |
||||||||||||||
|
11 |
||||||||||||||
|
10 |
8 |
7 |
6 |
|||||||||||
|
No. |
Description |
No. |
Description |
|||||||||||
|
1 |
USB 2.0 Ports (USB_1_2) |
7 |
USB 3.2 Gen1 Ports (USB3_1_2) |
|||||||||||
|
2 |
USB 3.2 Gen2 Type-A Port (USB31_TA_1) |
8 |
USB 3.2 Gen2 Type-C Port (USB31_TC_1) |
|||||||||||
|
3 |
LAN RJ-45 Port* |
9 |
Antenna Ports |
|||||||||||
|
4 |
Line In (Light Blue)** |
10 |
HDMI Port |
|||||||||||
|
5 |
Front Speaker (Lime)** |
11 |
PS/2 Mouse/Keyboard Port |
|||||||||||
|
6 |
Microphone (Pink)** |
|||||||||||||
* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
|
LAN Port |
||||||
|
Activity / Link LED |
Speed LED |
|||||
|
Status |
Description |
Status |
Description |
|||
|
Off |
No Link |
Off |
10Mbps connection |
|||
|
Blinking |
Data Activity |
Orange |
100Mbps connection |
|||
|
On |
Link |
Green |
1Gbps connection |
|||
** Function of the Audio Ports in 7.1-channel Configuration:
Port
Light Blue (Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
Function
Rear Speaker Out
Front Speaker Out
Central /Subwoofer Speaker Out
Side Speaker Out
English
9
1.5 WiFi-802.11ax Module and ASRock WiFi 2.4/5 GHz Antenna
WiFi-802.11ax + BT Module
This motherboard comes with an exclusive WiFi 802.11 a/b/g/n/ax + BT v5.1 module that offers support for WiFi 802.11 a/b/g/n/ax connectivity standards and Bluetooth v5.1. WiFi + BT module is an easy-touse wireless local area network (WLAN) adapter to support WiFi + BT. Bluetooth v5.1 standard features Smart Ready technology that adds a whole new class of functionality into the mobile devices. BT 5.1 also includes Low Energy Technology and ensures extraordinary low power consumption for PCs. The 2T2R WiFi solution sets a WiFi high speed standard and offers max link rate up to 2.4Gbps.
* The transmission speed may vary according to the environment.
ASRock WiFi 2.4/5 GHz Antenna
English
10
Z490 Phantom Gaming 4/ax
WiFi Antenna Installation Guide
Step 1
Connect the WiFi 2.4/5 GHz Antenna to the antenna connectors. Turn the antenna clockwise until it is securely connected.
Step 2
Set the WiFi 2.4/5 GHz Antenna at 90-degree angle.
*You may need to adjust the direction of the antenna for a stronger signal.
English
11
Chapter 2 Installation
This is an ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.
•Make sure to unplug the power cord before installing or removing the motherboard components. Failure to do so may cause physical injuries and damages to motherboard components.
•In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.
•Hold components by the edges and do not touch the ICs.
•Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
•When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
English
12
Z490 Phantom Gaming 4/ax
2.1Installing the CPU
1.Before you insert the 1200-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.
2.Unplug all power cables before installing the CPU.
1
A
B
2
English
13
14
Z490 Phantom Gaming 4/ax
Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
English
15
2.2 Installing the CPU Fan and Heatsink
FAN
CPU_
English
16
Z490 Phantom Gaming 4/ax
2.3 Installing Memory Modules (DIMM)
This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology.
1.For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.
2.It is unable to activate Dual Channel Memory Technology with only one or three memory module installed.
3.It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot; otherwise, this motherboard and DIMM may be damaged.
Dual Channel Memory Configuration
|
Priority |
DDR4_A1 |
DDR4_A2 |
DDR4_B1 |
DDR4_B2 |
|
1 |
Populated |
Populated |
||
|
2 |
Populated |
Populated |
Populated |
Populated |
The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
English
17
18
Z490 Phantom Gaming 4/ax
2.4 Expansion Slots (PCI Express Slots)
There are 5 PCI Express slots on the motherboard.
Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
PCIe slots:
PCIE1 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards. PCIE3 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE4 (PCIe 3.0 x16 slot) is used for PCI Express x4 lane width graphics cards. PCIE5 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIe Slot Configurations
|
PCIE2 |
PCIE4 |
||
|
Single Graphics Card |
x16 |
N/A |
|
|
Two Graphics Cards in |
x16 |
x4 |
|
|
CrossFireXTM Mode |
|||
For a better thermal environment, please connect a chassis fan to the motherboard’s chassis fan connector (CHA_FAN1/WP, CHA_FAN2/WP, CHA_FAN3/WP or CHA_FAN4/WP) when using multiple graphics cards.
English
19
2.5 Jumpers Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”.
|
Clear CMOS Jumper |
|
|
(CLRMOS1) |
2-pin Jumper |
|
(see p.7, No. 30) |
CLRMOS1 allows you to clear the data in CMOS. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short the pins on CLRMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action. Please be noted that the password, date, time, and user default profile will be cleared only if the CMOS battery is removed. Please remember toremove the jumper cap after clearing the CMOS.
English
20
Z490 Phantom Gaming 4/ax
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard.
System Panel Header
(9-pin PANEL1)
(see p.7, No. 22)
PLED+ PLED-
PWRBTN#
GND
1
GND RESET#
GND HDLED-
HDLED+
Connect the power button, reset button and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.
PWRBTN (Power Button):
Connect to the power button on the chassis front panel. You may configure the way to turn off your system using the power button.
RESET (Reset Button):
Connect to the reset button on the chassis front panel. Press the reset button to restart the computer if the computer freezes and fails to perform a normal restart.
PLED (System Power LED):
Connect to the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the system is in S1/S3 sleep state. The LED is off when the system is in S4 sleep state or powered off (S5).
HDLED (Hard Drive Activity LED):
Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data.
The front panel design may differ by chassis. A front panel module mainly consists of power button, reset button, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assignments are matched correctly.
English
21
Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.7, No. 19)
SPEAKER
DUMMY DUMMY +5V
1 
PLED+
PLED+ PLED-
Please connect the chassis power LED and the chassis speaker to this header.
Serial ATA3 Connectors (SATA3_0:
see p.7, No. 14) (SATA3_1: see p.7, No. 13) (SATA3_2: see p.7, No. 16) (SATA3_3: see p.7, No. 15) (SATA3_4: see p.7, No. 21) (SATA3_5: see p.7, No. 20)
|
SATA3 0 |
SATA3 1 |
|
SATA3 2 |
SATA3 3 |
SATA3_4 SATA3_5
These six SATA3 connectors support SATA data cables for internal storage devices with up to 6.0 Gb/s data transfer rate.
*If M2_2 is occupied by a SATA-type M.2 device, SATA3_1 will be disabled.
*If M2_2 is occupied by a PCIe-type M.2 device, SATA3_0 will be disabled.
USB 2.0 Header
(9-pin USB_3_4)
(see p.7, No. 25)
USB_PWR
P- P+ GND DUMMY
1
GND
USBP_—PWRP+
There is one USB 2.0 header on this
motherboard. Each USB 2.0 header can support two ports.
English
22
Z490 Phantom Gaming 4/ax
USB 3.2 Gen1 Headers
(19-pin USB3_3_4)
(see p.7, No. 11)
(19-pin USB3_5_6)
(see p.7, No. 24)
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
Vbus
IntA_PB_SSRX-
IntA_PB_SSRX+
GND
IntA_PB_SSTX-
IntA_PB_SSTX+
GND
IntA_PB_D-
IntA_PB_D+
Dummy
1
|
D+ PA IntA |
-D PA IntA |
GND |
SSTX+ PA IntA |
-SSTX PA IntA |
GND |
SSRX+ PA IntA |
-SSRX PA IntA |
Vbus |
|
|
1 |
|||||||||
|
Dummy |
D+ PB IntA |
-D PB IntA |
GND |
SSTX+ PB IntA |
-SSTX PB IntA |
GND |
SSRX+ PB IntA |
-SSRX PB IntA |
Vbus |
There are two headers on this motherboard. Each USB 3.2 Gen1 header can support two ports.
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.7, No. 28)
GND PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L J_SENSE
OUT2_R MIC2_R
MIC2_L
This header is for connecting audio devices to the front audio panel.
1.High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system.
2.If you use an AC’97 audio panel, please install it to the front panel audio header by the steps below:
A.Connect Mic_IN (MIC) to MIC2_L.
B.Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C.Connect Ground (GND) to Ground (GND).
D.MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to connect them for the AC’97 audio panel.
E.To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel and adjust “Recording Volume”.
English
23
Loading…
Specifications:2245/2245920-z490_phantom_gaming_425g.pdf file (27 Dec 2022) |
Accompanying Data:
ASROCK Z490 Phantom Gaming 4/2.5G Motherboard PDF Manual (Updated: Tuesday 27th of December 2022 07:04:09 AM)
Rating: 4.1 (rated by 94 users)
Compatible devices: AD410PV — V1.0, AD2550RA/U3S3, IMB-A1301, IMB-1001, B85M-DGS, Z390 Extreme4, H97M Anniversary, Z87 Extreme3.
Recommended Documentation:
Text Version of Manual
(Ocr-Read Summary of Contents of some pages of the ASROCK Z490 Phantom Gaming 4/2.5G Document (Main Content), UPD: 27 December 2022)
-
106, ASROCK Z490 Phantom Gaming 4/2.5G 104 Português Conector • 1 x Suporte porta COM • 1 x Plataforma SPI TPM • 1 x LED de alimentação e Cabeçote de Autofalante • 2 x Cabeçotes de LED RGB * Suporta no total até 12V/3A, Tira de LED de 36W • 2 x Cabeçotes LED Endereçáveis * Suporte no total de até 5V/3A, Fa…
-
88, 86 Español Cabezales de LED RGB (RGB_LED1 de 4 contactos) (consulte la pág. 1, nº 29) (RGB_LED2 de 4 contactos) (consulte la pág. 1, nº 7) 12V GRB 1 12V G R B 1 El cabezal RGB se utiliza para conectar el alargador de LED RGB que permite a los usuarios elegir entre varios efectos de iluminación…
-
126, 124 Polski Polski Złącze zasilania ATX 12V (8-pinowe ATX12V1) (sprawdź s.1, Nr 1) Ta płyta główna udostępnia 8-pinowe złącze zasilania ATX 12V. W celu użycia 4-pinowego zasilacza ATX, należy podłączyć je wzdłuż pinu 1 i pinu 5. Złącze zasilania ATX 12V (4-pinowe ATX12V2) (sprawdź s.1, N…
-
157, ASROCK Z490 Phantom Gaming 4/2.5G 155 Z490 Phantom Gaming 4/2.5G 简体中文 简体中文 后面板 I/O • 2 x 天线端口 • 1 x PS/2 鼠标 / 键盘端口 • 1 x HDMI 端口 • 1 x USB 3.2 Gen2 A 类型端口 (10 Gb/s) (ReDriver) （支持 ESD 保护） • 1 x USB 3.2 Gen2 C 类型端口 (10 Gb/s) (ReDriver) （支持 ESD 保护�…
-
134, 132 한 국 어 1.3 점퍼 설정 그림은 점퍼를 어떻게 설정하는지 보여줍니다 . 점퍼 캡을 핀에 씌우면 점퍼가 “단락” 됩니다 . 점퍼 캡을 핀에 씌우지 않으면 점퍼가 “단선”됩니다 . Clear CMOS 점퍼 (CLRMOS1) (1 페이지 , 30 번 항목 �…
-
2, AUSTRALIA ONLY Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaire…
-
169, ASROCK Z490 Phantom Gaming 4/2.5G 167 Z490 Phantom Gaming 4/2.5G 繁體中文 1.2 規格 平台 • ATX 尺寸 • 固態電容設計 CPU • 支援第 10 代 Intel® Core TM 處理器 (Socket 1200) • Digi Power design • 10 電源相位設計 • 支援 Intel® Turbo Boost MAX 3.0 技術 • 支援 Intel® K 系列未鎖頻 CPU • 支�…
-
ASROCK Z490 Phantom Gaming 4/2.5G User Manual
-
ASROCK Z490 Phantom Gaming 4/2.5G User Guide
-
ASROCK Z490 Phantom Gaming 4/2.5G PDF Manual
-
ASROCK Z490 Phantom Gaming 4/2.5G Owner’s Manuals
Recommended: dustbuster pad1200, pH 21, WF221ANG
-
Beckhoff CB1050
Beckhoff Automation GmbH phone: +49 (0) 52 46/963-0 Eiserstr. 5 fax: +49 (0) 52 46/963-198 33415 Verl email: [email protected] Germany web: www.beckhoff.de CB1050 Manual rev. 1.2 ATX power supply …
CB1050 82
-
Analog Devices EVAL-ADXL375
EVAL-ADXL375 User Guide UG-598 One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com 3-Axis, ±200 g Digital Accelerometer Evaluation Board PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS …
EVAL-ADXL375 2
-
Avalue Technology HPM-246
DMR Number: T55752-00 Part No: E2047IG4601R Rev: 2nd HPM-246 Intel® LGA1151 Socket Supports 8th/9th Generation Core™ i7/ i5/ i3 / Pentium® /Celeron® / Xeon® E Process User’s Manual 2nd Ed –08 April 2020 …
HPM-246 97
-
ASROCK Z75 Pro3
1Guide to SATA Hard Disks Installation and RAID Confi guration1. Guide to SATA Hard Disks Installation …………………………2 1.1 Serial ATA (SATA) Hard Disks Installation …………….22. Guide to RAID Confi gurations …………………………………….3 2.1 Introduction …
Z75 Pro3 11
Popular Right Now:
Operating Impressions, Questions and Answers: